LOOKAH Q7 Mini Enail Features

The LOOKAH Q7 Mini Enail banger is a smaller, more user-friendly version of the previous LOOKAH E-nails.

It uses the 710 series quartz atomizers to enhance the flavor of your dabs. There are four different coil types, so you can choose the one that gives you the best heat and flavor for your preferences. It comes with two atomizers, so you have everything you need to get started.

This little powerhouse has a 950mAh battery, which means the Q7 Mini can provide around 80 to 100 dabs from a single charge.

Like the earlier model, the Q7 Mini can fit most 14mm to 18mm joint pipes. It includes a silicon sheath for the downstem, which allows it to be used with larger joint pipes. You can remove the sheath when using the enail banger with 14mm joint dab rigs.

The Q7 Mini has three different voltage settings that you can adjust by double-clicking the power button. These settings allow you to control the temperature between 350 to 450 degrees Fahrenheit. The lower vaping temperatures help to preserve the terpenes and flavonoids, providing a more flavorful vaping experience.

Thanks to its small size, you can easily carry the Q7 Mini Enail wherever you go, making it the ideal enail dab kit for people who are always on the go.

How to Use the LOOKAH Q7 Mini Enail

1. Put the Q7 Mini into the downstem of your water pipe.

2. Open the magnetic flip cap and put a small amount of wax into the center of the atomizer coil.

3. Close the flip cap.

4. Press the power button 5 times within 2 seconds to turn on the Q7 Mini enail.

5. The device will start to warm up, and the display will show a countdown from 9 to 0 as it heats.

6. After the preheating, the light will flash 2 times.

7. Click the power button 2 times to select the voltage mode. The mode will be 1, 2, or 3 on the display screen.

8. Hold the power button for up to 30 seconds to heat the atomizer and vaporize the wax.

9. Inhale from the mouthpiece of the water pipe. You can adjust the airflow by covering the carb on the flip cap.

10. Remember to wipe around the atomizer to remove any extra wax, and turn the device off after use.

How to Clean the LOOKAH Q7 Mini Enail

1. Open the lid of the Q7 vaporizer.

2. Unscrew and remove the atomizer by turning it to the left.

3. Unscrew and remove the downstem by turning it to the right.

4. Use a brush and rubbing alcohol to clean the air pathway between the downstem and atomizer coil.

5. Use a Q-tip and rubbing alcohol to clean the area around where the coils would screw into the device.

6. After each time using the Q7, you can use a Q-tip to clean the atomizer coil.

7. Wipe the carb cap and the body of the vaporizer with a damp cloth and dry it well afterward.

8. Once everything is dry, put the parts back together.

LOOKAH Q7 Mini Electric Nail Specification

Battery Capacity:950mAh
Input Voltage: 5V
Voltage Range: 3.2v-3.6v-4.0v
Heating Coil: 710 Coil
Operation: Button-Activated
Charging: Type-C Port
LED Indicator Light
Dimensions:85mm x 55mm x 28mm

Package Includes

1 x Q7 mini
1 x 710 Coil
1 x Silicone Sleeve
1 x User Manual

Q7 Mini User Manual

Download

LOOKAH Q7 Mini Enail FAQ

Q: LOOKAH Q7 Mini showing 9 or 0. How to fix it?

A: If a 9 or 0 is shown on the display screen, it indicates a short circuit or open circuit. Please check the thread of the device and the atomizer coil to ensure they are clean and have a good connection. If the fault remains try a different atomizer coil.

Q: LOOKAH Q7 Mini is showing 8. How to fix it?

A: If an 8 is shown on the display screen while the device is connected to the charging cable and port, the load battery is fully charged.

Q: LOOKAH Q7 Mini is showing L. How to fix it?

A: If an L is shown on the display screen, the battery has low power. You need to charge the device before use.

LOOKAH Q7 Mini Protable Enail