Skip to content
Puffco Peak Running Hot? 7 Common Causes and Fixes
The Puffco Peak is a powerful electric dab rig with 3D ceramic heating chamber that delivers excellent vapour quality,
Even with its advanced design, the Puffco Peak is not immune to problems.
One Common issues that users might encounter is it running hot and won’t cool down.
If your Puffco Peak is getting excessively hot, it could indicate a problem with the atomizer or coil, and it's important to address it to prevent potential safety issues.
Puffco Peak Running Hot? 7 Common Causes and Fixes
The Puffco Peak running hot Problems can manifest as the device is very hot even at lower temperature settings. This can be due to a faulty heating element, poor connections, or a need for recalibration, etc.
1. Stuck in Heat Cycle / Software Glitch
Sometimes the heating element doesn't receive the signal to stop.
Fix:
Power off the device completely. Hold power button for 3–5 seconds to turn it off.
If it won’t turn off, disconnect power or remove the battery (if possible).
Wait 1–2 minutes, then restart.
2. Sensor Failure / Overheating
If the temp sensor is faulty, the device may keep heating or misread the temperature.
Fix:
Stop using immediately to avoid damage. Let it cool naturally.
Check for firmware updates via app.
If problem continues, you may need to replace the atomizer or temp sensor.
3. Dirty or clogged atomizer
Residue buildup can block heat escape, making the rig feel like it’s overheating.
Fix:
Let it cool, then fully clean the atomizer, Connection thread, and airpath with isopropyl alcohol.
Use a Q-tip dipped in isopropyl alcohol to Clean heating chamber, threads and air paths regularly.
Remove the ceramic atomizer and soak in 91%+ isopropyl alcohol for deeep clean.
4. Damaged atomizer
A failing atomizer can overheat or heat unevenly.
Fix:
Try replacing the atomizer if it’s old, cracked, or burnt smelling.
5. Outdated Firmware
If you’re using a Peak Pro, outdated firmware can cause heating issues.
Fix:
Use the Puffco Connect app to update firmware.
6. High Wattage / Voltage Settings
For the Puffco Peak, high wattage = more heat.
Fix:
The Peak has four heat settings: Blue – Low, Green – Medium, Red – High, White – Peak/Max. Lower your wattage/voltage settings.
Press the button once to cycle through heat settings. Try Blue or Green to reduce heat. You can also lower the temp in the mobile app.
7. Frequent use without cooldown
If you're using it back-to-back, the ceramic bowl can overheat.
Fix:
Let it cool down between sessions (1–2 minutes).
Tips to Keep It Cool:
1. Use lower temp settings for flavor and smoother hits.
2. Don’t overload the heating chamber — small dabs vaporize more efficiently.
Conclusion
By being proactive and addressing these common issues promptly, you can maintain the functionality of your Puffco Peak and enjoy a superior wax vaping experience.
If your device is hot to the touch when idle or smells burnt without use, turn it off immediately. Let it cool in a safe, non-flammable area.
It could be a malfunctioning battery or chip — and in rare cases, a fire risk.
