Why is my lookah bear battery blinking yellow? 4 Common Reasons and Solutions

Lookah Bear is a fun, cute, and powerful 510 thread vape cart battery loved by vapers all over the world.

However, it's not uncommon for users to encounter issues with their lookah bear battery, such as blinking yellow lights.

 In this article, we will explore the reasons why your lookah bear vape pen battery might be blinking yellow and provide possible solutions to troubleshoot these common problems.

Why is My Lookah Bear Battery Blinking Yellow? 4 Common Reasons and Solutions

If the LED indicator light of lookah bear battery flashes yellow 5 times when you press the power button, then this indicates an open circuit problem.

This problem can be caused by Poor connection issues including Loose or Tight connection, dirty connection, connection pin issues or incompatible components .

When the connection is damaged, your vape pen’s atomizer is unable to connect to the heat source (the battery). Therefore, the oil is not heated up, and vapor is not produced.

1. Loose or Tight Connection

A loose or tight connection between the cartridge and the battery can prevent the device from functioning. 

Solution:

If the connection is loose, try tightening the cartridge gently, ensuring it's not too loose. 

If the connection is too tight,  Unscrew and reconnect the battery, ensuring it's not too tight. 

2. Dirty  Connection

Over time, dirt and grime build up on threading and interfere with the connection between the cartridge and battery. 

Solution: 

Carefully clean the connector with a Q-Tip and Isopropyl alcohol (99%). This will improve conductivity and restore a solid connection. 

3. Connection Pin Issues

A common issue that occurs with Lookah bear 510 thread vape pen battery is that the cartridge or charger is screwed on too tight, causing the connection point to be pushed down. 

Solution: 

Check the connection pin on both the battery and the cartridge. 

If the pin is stuck or pushed in, carefully use a  paper clip or other small tool to pull it back into place. An adequately aligned pin ensures a secure connection.

4. Incompatible Components

 Mixing incompatible parts can lead to performance issues. 

Solution: 

Confirm that the battery and cartridge are compatible. Some devices may have specific requirements for voltage or resistance.