LOOKAH Q7 E-Nail

• LOOKAH Q7 Electric Nail Features

  The Lookah Q7 is a compact electric dab nail with a large battery and precision temperature setting.

  • This enail has a 2000mAh battery that rapidly heats the quartz coil dozens of times from a single charge. The LED screen gives an accurate battery charge reading, so you'll never worry about running out of power again.
  • Precision temperature settings from 200°F to 750°F in 5-degree increments let you set the perfect temperature for every dab. Switching to an electric dab nail lets you take the guesswork out of dabbing with a torch and offers consistent results every time.
  • The Lookah Q7 electric nail uses a built-in patented quartz coil for cold starts and precision dabbing. The heating chamber has a temperature sensor and shows an accurate temperature reading.
  • A silicon sleeve on the downstem of the Q7 enail lets you adjust the device to fit 14mm or 18mm female joint dab rigs. The LOOKAH enail can easily pair most small and medium-sized dab rigs.
  • The Q7 nail has an easy-to-use, intuitive interface with an LED display for real-time feedback. The plus and minus buttons make it quick and easy to adjust temperature settings.
  • If you're looking for portability, the Q7 enail is a great pocket-size device that delivers excellent flavor and is a fraction of the size of those clunky desktop mains powered enail.

   

  How to use the Q7 Enail:

  1) Open the lid and place a small amount of wax into the chamber's center, then close the lid.

  2) Turn on the device by pressing the power button five times.

  3) Use the plus ➕ and minus ➖ buttons to adjust the temperature displayed on the screen. Each press changes the temperature by 5 degrees. To switch between Celsius and Fahrenheit, press and hold the plus ➕ and minus ➖ buttons together.

  4) Press and hold the power button for 3 seconds to start the preheat. When the preheat cycle begins, you'll feel a vibration, and the display temperature will climb to the preset temperature.

  5) When the device is nearly at the preset temperature, it will vibrate to indicate it's ready for dabbing. The temperature will stay constant for 60 seconds.

  6) You can use the carb cap in the lid to adjust airflow.

   

  How to Clean the Q7 Enail

  This Q7 has a built-in atomizer coil. The coil can't be removed or replaced. 

  1) Open the lid and use a Q-tip and some isopropyl alcohol to clean around the inside of the coil.

  2) Remove the carb cap by pressing down on the top with your finger and unscrewing the underside. You can watch a video for more details.

  3) Unscrew the downstem and clean it using the provided brush or a pipe cleaner and some isopropyl alcohol.

  You can watch a video if you need more guidance.

  4) Once everything is clean, screw the carb cap and downstem back in place.

Lookah Q7 Enail Specification

• Battery Capacity:2000mAh
• Input Voltage: 5V
• Temeprature: 200°F - 750°F
• Heating: Built-in Durable Quartz Coil
• Operation: Button-Activated
• Joint: Fits 14mm to 18mm Female Joint Dab Rigs
• Charging: Micro USB Port
• LED Indicator Light
• Dimensions: 85mm x 55mm x 28mm

Package Includes

• 1 x Q7 Enail
• 1 x Quartz Coil
• 1 x Silicone Sleeve
• 1 x Charging Cable
• 1 x Dab Tool
• 1 x User Manual

LOOKAH Q7 User Manual

Download-1
Download-2